Contact Now

+1-(907) 345-5711

1227 Margaret Street Houston, TX 77040

Yogaclasswellness@mail.com

Edit Template

Contact Now

+1-(907) 345-5711

1227 Margaret Street Houston, TX 77040

Yogaclasswellness@mail.com

Edit Template

Curtain Wall Section Supplier: How Delhi Fabricators and Builders Can Shortlist the Right One

Most curtain wall problems don’t start on site. They start a few weeks earlier, at the point where someone picks a curtain wall section supplier mainly because the quote looked friendly.

If you are a fabricator, contractor or builder in Delhi, you already know the pressure. The drawings are approved, the glass order is moving, and the frame material has to arrive on time and match the spec. This guide is about that one decision: how to shortlist a supplier, what to ask, and how to compare offers without getting lost in numbers.

We have written it from the supplier’s side of the counter. Bahubali Aluminium Co. has been supplying aluminium profiles from Paharganj, New Delhi for over 25 years, and the questions below are the ones we think every buyer should be asking, whoever they buy from.

First, What Exactly Are You Buying?

Aluminium curtain wall sections are the extruded frame members that hold glass or panels on a building’s outer face. When people search for curtain wall profiles, they usually mean these frame sections, not the finished facade.

That difference matters when you ask for a quote. A supplier of sections gives you the extruded aluminium. Fabrication, glazing and installation are separate jobs, often done by your own team. If you want to understand how the full system works (stick-built, unitized, structural glazing), we have covered it in our guide to aluminium curtain wall systems. This article stays on the buying side.

Step 1: Send a Clear Requirement, Not Just “Need Curtain Wall Sections”

A vague enquiry gets a vague quote. Before you call anyone, put these details on paper:

  • Section drawings or profile reference, if you have them
  • Required lengths and approximate quantity
  • Finish and colour (powder-coated, anodized or polished)
  • Whether you need a standard profile or a custom one
  • Project location and the date you need material on site

Even a rough sketch with measurements helps a supplier tell you quickly whether something is available off the shelf or needs a new die. It also makes the quotes you receive easier to compare later.

Step 2: Ask About Alloy, Temper and Wall Thickness

This is where two quotes for the “same” section can be very different in real life.

Aluminium sold for architectural extrusions is usually in the 6063 alloy family, supplied in tempers such as T5 or T6. Ask the supplier to state the alloy and temper in writing instead of just saying “premium quality”. Then ask for the wall thickness of the section in millimetres.

A useful habit: ask what the section should weigh per metre, and check a few pieces when they arrive. A section that is noticeably lighter than the quoted weight is usually thinner than it should be. It may look identical on the shelf and still struggle once the glass is loaded into it.

If your consultant has specified a section size, share that with the supplier directly. It saves a lot of back and forth.

Step 3: Look Closely at the Finish

At Bahubali Aluminium Co., our curtain wall sections are available in powder-coated, anodized or polished finishes, and most suppliers will offer a similar choice. The finish is what your client actually sees, so don’t treat it as an afterthought.

  • Powder coating gives you a wide colour range and a uniform, tough surface.
  • Anodizing gives a more metallic look, with fewer colour options.
  • Polished finishes are more about appearance than protection.

Whichever you choose, ask to see a physical sample in the actual colour. Screen colours and catalogue pages can look different from the real piece. Also ask whether your whole order will come from one batch. On a long facade, a slight colour difference between batches is easy to spot once the frame is up.

Step 4: Decide Between Standard and Custom Profiles

Standard sections are quicker to get, because they are already in production. Custom profiles give your designer more freedom, but they need a die to be made and they take more time.

So ask early:

  • Is my section already available, or does it need a new die?
  • Is there a minimum order quantity for custom work?
  • How long will it take from approval to delivery?

A good supplier answers these plainly. If you are still at the design stage, it can be smart to speak to the supplier before the drawing is frozen. Sometimes a small tweak in the profile avoids a custom die altogether. You can see what we currently offer on our curtain wall sections page, and the full range is in the product catalogue.

Step 5: Check Lengths, Straightness and Tolerances

Curtain wall frames are unforgiving. A bent or twisted section is hard to hide once glass goes in.

When material arrives, do a quick check before you sign the challan:

  1. Roll a few sections on a flat surface and look for bends or twist.
  2. Check the lengths against your order.
  3. Look at the finish for scratches, patches or dull spots.
  4. Confirm that the section shape matches your drawing at the cut ends.
  5. Check that packing protects the finish during transport.

Five minutes at the unloading stage can save a lot of rework later.

Step 6: Think About Stock, Delivery and Communication

A supplier can have a good product and still be the wrong choice if they can’t deliver on your schedule. Ask how long the order will take, whether partial deliveries are possible, and who you should call if something goes wrong.

This is one reason many buyers prefer working with an aluminium sections supplier in Delhi they can actually visit. You can see the material, check a sample, and talk face to face, which is much harder with an unknown seller on the other side of a phone line. Our shop is at G-12, Pushpa Complex, D.B. Gupta Road, Paharganj, New Delhi, and buyers are welcome to come and look at the sections in person.

Step 7: Compare Quotes on Equal Terms

When the quotes come in, put them side by side using the same checklist:

What to compareWhy it matters
Alloy and temperAffects strength and finish quality
Wall thickness / weight per metreDecides how well the section carries the glass
Finish type and colourAffects looks and long-term wear
Standard or custom profileChanges cost and lead time
Delivery timeKeeps your site schedule safe
What is includedSome quotes leave out finishing or packing

If one quote is much lower than the rest, don’t just celebrate. Ask why. Often the answer is a thinner wall or a different material grade.

Common Mistakes Buyers Make

  • Asking for a price before sharing the section details
  • Accepting “aluminium” as a specification without alloy and temper
  • Ordering the finish in parts, from different batches
  • Skipping the sample check for colour
  • Leaving custom profile enquiries until the last minute
  • Choosing only on price

Frequently Asked Questions

1. What does a curtain wall section supplier actually supply?

A supplier provides the extruded aluminium sections used to build the frame of a curtain wall. Fabrication, glass and installation are usually handled separately.

2. Can I get custom curtain wall profiles in Delhi?

Yes, custom profiles are possible with many suppliers, including us, though they depend on quantity and the time needed to make the die. Share your drawing early so the supplier can tell you what is practical.

3. Which finishes are available for curtain wall aluminium sections?

Powder-coated, anodized and polished finishes are the common choices. The right one depends on your design brief and how the facade will be used.

4. Are curtain wall sections only for commercial buildings?

They are widely used in commercial and high-rise buildings, and also appear in residential facades where large glass areas are wanted.

5. How do I request a quote?

Share the profile details, lengths, quantity, finish and delivery date with the supplier. The clearer your requirement, the faster you will get a usable quote.

Final Thoughts

A good curtain wall section supplier is not just someone who sells you aluminium by the kilo. It’s someone who answers technical questions without dodging, shows you a real sample, and tells you honestly what is in stock and what is not.

If you are planning a project in Delhi and would like to discuss profiles, finishes or custom options, the team at Bahubali Aluminium Co. is happy to help. Call Sanjay Jain on +91 9811073759 or Samyak Jain on +91 9310488239, or visit us at G-12 Pushpa Complex, D.B. Gupta Road, Paharganj, New Delhi-110055. You can also contact us here.

Leave a Reply

Your email address will not be published. Required fields are marked *

Trending Posts

  • All Posts
  • Aluminium
  • Breathwork
  • Flexibility
  • Meditation
  • Wellness

About us

Bahubali Aluminium Co. (BAC)  is a leading aluminium company in India with 25+ years of expertise in aluminium profiles, powder-coated finishes, and custom aluminium solutions. We supply architectural, railing, glass, domal, and industrial aluminium products trusted by architects, builders, and industries across residential, commercial, and industrial projects.

Contact us

© 2025 Bahubali Aluminium Co.

All rights reserved. Created by CYPWebTech